Garage Door

Troubleshooting Techniques for Automatic Garage Doors

Nowadays, a garage is more than a space to park a car. Oftentimes, it is the first place a person visits upon entering a house. This is why it is compulsory to keep the garage door in a good working position with the help of periodic garage door maintenance. If you have an automatic garage door with an electric opener and thinking about who can “fix my garage door“, here are some troubleshooting techniques to help you get by.

  • Check the power supply of the garage door. The problem may lie in the possibility that the garage door opener is not getting enough power supply. There is a chance that the garage door opener has been unplugged. Fixing an electric problem may need the assistance of professional garage door technicians.
  • If it is plugged incorrectly, try to change the batteries of the remote to operate the garage door. If this trick does not work, pull the emergency release chain to shift the garage door to manual operations. If doing so does not help to handle the problem, then proceed to the next step.
  • Inspect the garage door thoroughly to make sure that there are no obstructions on the tracks of the garage door such as, accumulated dirt or small stones. Clogged or dirty tracks make it hard to open or close the garage door. This is why; they should be cleaned and oiled periodically. Lubricate all the moving parts to keep them working.
  • Check the garage door tracks to find out the dents, warps, and other malformations which make the garage door hard to open. The minor dents can be pounded on your own using a rubber mallet. The seriously damaged tracks should be replaced with the new ones.
  • Allow the motor to cool for about 15 minutes. The garage door motor could be overheated due to continuous operations. Once it cooled down, try to operate the garage door again. If it does not work efficiently then call garage door professional garage door experts.
  • If your neighbor is using a security code similar to yours, it could be causing the problem. Change the passcode and see if it solves the issue. Try to press the auxiliary button if it does not work then the remote could be the problem.
  • The garage door should be aligned correctly. If they are not, correct the alignment to make the garage door functional. In addition to this, check the transmitter if it activates the driven unit but the garage door does not respond. You should check the drive belt which may need to be replaced.
  • Inspect the pulleys, cables, and opener of the garage door. If they are loose or worn out, you may need to adjust or replace them. Broken garage door springs should be replaced with the help of professional garage door companies.
  • Check the safety sensors. If the garage door moves in reverse upon touching the ground, then the safety control sensors could be the problem. If the garage door opens and closes partially, you may need to adjust the limit switch. If it does not call a professional garage door technician for help.

Garage Door Repair Tips and Advises

A garage door will become malfunction with the passage of time due to general wear and tear. Minor garage door problems can be fixed on your own but for a major garage, door tasks should be handled by professional garage door companies like, Noblesville, Indianapolis garage door repair in order to avoid incidents. If you are thinking about performing a garage door repair project on your own, the following mentioned are the common garage door issues that you can fix on your own.

The garage door is opening and closing on its own. Although it might seem strange the explanation behind it is quite simple. Anyone else in your neighborhood might use a security pass or access code that is similar to yours. Their frequency could interfere with your radio receiver. Furthermore, the radio in the police cars and airplanes could also have a similar frequency. The best resolution is to use the rolling code technology that changes the code randomly when a garage door is used.

The process of changing the security manually is different for all garage door openers. In most cases, you will have to hold the transmitter placed near the box of the opener and then press the button for about 60 seconds. The time duration will be decided through the user’s manual. The latest models of garage door openers are designed with rolling code technology which is used to change the code using an auto-pilot mode if the transmitter is used.

Another common problem is, that the garage door is going halfway down and then up when you are trying to close it. In this case, garage door sensors are the problem. Automatic garage doors are installed with a safety sensor that will detect the presence of anything when there is an obstruction on the way of the garage door. The sensors will send signals and pull the garage door upward.

The obstruction could be a toy, bucket, or broom so once you remove the hurdle; the garage door will function correctly. The problem could also happen if the lenses of the sensors are dirt and dusty. To fix the issue, it is best to clean the lenses.

Finally, you may experience that the garage door is not responding after resting the transmitter. In case, you think that the transmitter of the garage door opener is not working, it could mean that the battery of the remote is low and need to be replaced. If possible, check the power supply to make sure that it is working correctly. If you are unable to fix the problems with a garage door, there is a chance that the transmitter is damaged and should be replaced.

The Easy Way of Garage Door Installation

Garage door installation is a hard, complicated, and frustrating process to handle on your own. So, hire professional garage door companies that have teams of expert technicians who have the right expertise to install the garage doors perfectly. They will charge you according to extend to work. But there are some spam garage doors companies that exist in the market that charge as much as they want for the work. A garage door installation is not one of the safest projects which you can handle on your own. Most people end up with damages and injuries. In this article, you will find some important points that could help you to install a garage door safely and correctly. For great information about the topic of garage door installation, https://www.indianapolisgaragedoorpros.com/garage-door-installation/ visit the website right now.

For the garage door installation project, the spring system will be important to consider. A standard garage door torsion spring is challenging and dangerous to install, adjust, or replace without professional assistance.  On the opposite side, the extension garage door springs are easier and safer to handle. So, it is best to check the manual’s instructions provided by the manufacturer to check which of the system you are using with your current garage door.

For new DIY garage door installation, you should keep an instructional manual in hand and make sure that you have read it carefully before you start the project. There are some basic tools that you might need includes hammers, pliers, electric screwdriver, and tape measure. You should use a sawhorse or workbench to assemble the different sections of the garage door. Since the garage door comes in multiple sections so, the first step should be assembling them in the right order before putting the garage door.

In case of garage door replacement, you will have to remove the old garage door. It is best to take it off before conducting the installation work. After removing the garage door along with the tracks, it is recommended to inspect the frame to find out any damage, fault, and rot. In case of damages, it is better to replace them with new ones.

Garage Door

The most important step of garage door installation is to put the first section to level because the remaining sections will be placed on it. To avoid having a crooked garage door, make sure that the mounting brackets of the first section are installed with high attention and tightened securely. After placing the first section, you will have to attach it to track and match rollers. Repeat the process of installing the sections, tracks, and rollers until everything is installed correctly.

The next step of garage door installation project will be installing the horizontal tracks towards the ceiling of garage. These steps can easily be accomplished using a ladder or appropriate tools to support the horizontal tracks when you are focusing on bracing. It is important to install the garage door by maintaining the correct balance of the tracks. Finally, install the torsion springs. Don’t forget that garage door springs will be dangerous to install on your own. It is strongly recommended that hire a professional garage door technician to handle the project for you.

Malfunction Garage Door? Some Common Problems and Solution

There are two main parts of the garage door. One is a garage door opener and the other is a garage door operating mechanism which includes garage door panels, tracks, rollers, and springs.

These components allow the garage door to go up and down smoothly. Actually, the garage door is the largest moving equipment around your house. You might be using your garage door more than another entry door. If it is not properly maintained it can become a major inconvenience. There are a lot of professional garage door companies including garage door repair in Arrow, Oklahoma that offer valuable services to help you in this regard.

There are a lot of components that should work together to make your garage door functional. If your garage door wears out it is normally a process of depreciation. You should inspect the garage door thoroughly to find out the faulty parts that are making your garage door wrong. One of the challenging things is that oftentimes there is more than one part that is malfunctioned. Some faults are mechanical and others result from installing the wrong size of springs and motor.

Garage door opener:

There are several things that can go wrong with the garage door opener. If the garage door opener becomes malfunctions, it is always best to start the project with simple checkups. Make sure that the garage door opener is getting enough power and the circuit breaker has not been tripped. If the garage door opener looks fine but the garage door won’t open using a remote control, check its batteries. The broken remote should be replaced. Many garage door companies offer the remote unit to sale separately.

Garage door mechanism:

If your garage door refusing or sticking as it goes up or down you should check the operating mechanism that makes it function. One obvious garage door repair task is the cleaning of tracks to remove dirt and dust. You may use a mild household cleaner to clean the tracks. once they are cleaned, use any premium quality lubricant or WD-40 to oil the tracks and rollers to make sure they are running freely.

Look for dented or loose areas of tracks. The tracks are attached to the trim and ceilings with mounting brackets. With the passage of time, these brackets can become loosened due to the pressure of raising and lowering operations. Another problem can be rollers that are attached to the garage door. In the case of wooden garage doors, the pressure on the screws can force them to wiggle and become damaged. To fix the problem, you need a large screwdriver and tighten the loose parts. Be careful about working on garage door springs. It can be dangerous if you don’t know about their mechanism and don’t have the right tools. Leave the garage door springs to the professional garage door experts.

Bottom line:

Make sure that you know you can handle it and when you need to hire someone else who is experienced enough to complete it. Don’t take a chance on making garage door problems worse by performing garage door repair on your own. You might handle them improperly and cause bigger garage door problems.  

Should You Attempt Your Own Automatic Garage Door Install?

An automatic garage door is one of the magical machines available in the modern world and goes a long way to make our lives convenient and comfortable. Having an automatic garage door means that you don’t need to take off the car to open or close the garage door manually.

Of course, these garage doors are a blessing to have until something goes wrong with them and they need to be replaced. There are plenty of garage door companies such as, Cincinnati garage door supplier that offers excellent garage door replacement services.

Most of us have garage door concepts as something that opens and closes and allowing us to put our cars inside and outside of the building. Wrong, garage doors actually do a lot more for us. If you have attached a garage then your garage door will create an insulated seal between your house and outside weather conditions. Consequently, it eliminates the energy cost by maintaining a moderate temperature within your house. A well-functional garage door also increases the security of your home and adds a great amount to the curb appeal and thus increases the value of your property. All of these points give us relevant logic to install a right and efficient garage door.

To save money, some people endeavor to install their new garage doors on their own. This task may sound easier than it really is but it is a complicated and tricky job. A new garage door can weigh as much as 1000 pounds and install with a stress operating system such as torsion springs.

Since it is not the right job for immature individuals, take the help of friends who have technical expertise when the time comes to perform garage door installation. You will need professional assistance because you work down through several processes to ensure a successful job. In a nutshell, common steps may include:

  • Start your project by attaching the metal tracks to the wall
  • Assemble the sections and place rest of them together
  • Attach the mounting brackets at the end of each section
  • Install the mounting brackets to the garage door jamb
  • Attach the motor
  • Make an electric connection between the motor and wall switch
  • Install the safety sensors at the bottom of the tracks.
  • Place the garage door opener
  • Once you have finished the installation, make sure that everything is tightened ad aligned properly

DIY garage door installation job can be dangerous if you don’t know what you are doing and what is gone because you will have to work with the highly tensed garage door torsion springs and electricity. There are several decisions to make about how the garage door installation needs to be done. You should follow the directions provided by the manufacturer. If at any stage, you don’t feel confident about your capabilities, stop and call a professional garage door expert because it is not a good job for immature individuals, no matter how well attentive you are.

Things to do before calling the Garage Door Repair Experts

Most garage door repair tasks can be easier than you may think. But garage door companies such as, best garage door repair service in Coweta County are superfluous because there are some kinds of problems which really need the expertise and experience of those who are trained and qualified properly to fix the things. Normally, garage door technicians can be called upon to fix the problems that the homeowners have no idea how to deal with them but there are some home remedies that you can perform before actually calling a professional garage door repair company.

Clean up services:

Garage door functions with the help of series of cables, supporting hardware, and tracks on which it runs. These metal tracks can easily accumulate dust, dirt, and debris especially if your house is located on a dusty road or you live in a climate where there is a lot of rain and snow. Garage door work for dirt or rusty tracks is to actually clean them to remove these obstructs. Some garage doors are installed with tracks that are easy to access and treat, thus cleaning and fixing them are very easy for you. Harden grease can easily be cleaned to remove the obstacles from the panels. You should practice extreme care while removing obstructions from tracks. The rollers that run on tracks may be worn out or get rusted which can be replaced for the correct functionality of the garage door. Sometimes, it is also beneficial to check the performance of tracks and rollers. Garage door operations might be restricted due to the lack of lubrication.

Aside from obstruction on the tracks, another reason behind the rough opening and closing process might be the loose mounting brackets that hold up the tracks. These mounting brackets should be secured to the walls so that they can keep the tracks straightened and aligned. If one or more brackets becomes loose, the alignment may be in jeopardy and panels will not run on the tracks correctly. To make sure that tracks are aligned properly, you can use a level to determine if everything is in its correct position. Tapping the tracks into their correct place might work to adjust the balance of the garage door.

Garage door torsion springs:

Rough operations of a garage door can be related to the broken torsion springs which can be replaced as soon as possible. Garage door torsion springs are placed on the top of the garage door. Sometimes the tension of the springs can be dangerous to handle. Replacing the torsion springs can be the solution to the problem. It is always recommended that hire a professional garage door expert to replace the springs because they are complicated and dangerous to handle.

DIY Garage Door Repair – Is the Door Open Or Closed This Spring?

“Do you want to replace your garage door springs”? Any experienced individual might shriek electronically or surprisingly. “You would have to be crazy or gone mad”. Just call a garage door professional expert to get the project done right away.  You might get hurt or injured badly. Do I agree or disagree? I know that your answer might probably “Yeah”. As winter turns to spring, you may experience that the garage door is out of order. What will your best step? Click here to get more information about garage door spring replacement.

You can get all information on the internet about whether you can handle a DIY garage door repair project or should hire a professional to do the work. Although both views can argue why or why not and what will be the considerations, priorities, and safety measurements that can help you? It is easy to determine that the DIY garage door spring replacement project also poses some dangerous aspects.  So it is certainly a serious matter to consider. Nobody wants to lose hands, limbs, or even life for something you could easily hire out for. Secondarily, it needs a sufficient amount of time. Do you really have enough time to learn tips and tricks about this to make it worthwhile?

I would advise a quick action to start: In the past few months, how many components have you willingly undertaken that need electrical and mechanical skills? If you naturally drift towards DIY fixing and repairs around your home, you may be a right candidate than someone who prefers to hire. It is possible that you may have some tools in your garage but you will need additional tools to actually perform the task. On the other hand, some individuals are born shoppers. They have the expertise to collect different prices and to compare them to find out the best possible deal.  There are several commercial websites which you can visit to get all the required information. Your comparing, evaluating, reasoning, and discussion skills will serve well in accessing a reliable garage door service at a decent price.

Now evaluate the risk associate with this project, I know that everything we do every day involves some sort of risk. Driving a car is actually caused by exploding gasoline and plumbing the bathroom pipes is also dangerous. I want to say that when we perform routine tasks then we are conversant with certain risk factors. It means that controlling the risk related to DIY garage door spring repair and replacement project is key.

Most of us understand and respect the power of wounded springs. We need to understand the connection between the parts according to their mechanical sounds and sequential procedures. Reading informational blogs and watching tutorial videos will be a good start. Speaking with experts and corresponding to the DIY forums is also good. It is strongly recommended that if you are not confidents about your skills and knowledge; hire a professional garage door repair company to handle the task.

Safety on Installing a Garage Door Spring

Every year, there is an average of 30,000 injury cases related to overhead garage doors. It is a proven survey of the US Consumer Product Safety Commission. There might be amputations, fractures, or even crushing from the garage door that could lead to extreme dangers like death. Do you know that the most hazardous part of the garage door is its spring? It is always recommended that either you choose to do it on your own or have someone to do garage door spring repair professionally, there are certain precautions that must be taken care of when it comes to garage door spring repair or replacement.

Old versus new models of garage door spring:

Unlike the old design of springs, new springs are created with a core rod inside the spring coil. This is why; old designs of springs are more dangerous in the event of failure. A broken spring could throw off steel shrapnel and other sharper pieces in your garage. They can fly around and damage your car or hurt someone. In the recent core rod spring designs, the broken chunks of metal will retain in the case of malfunction. Definitely, you should go with the new types of springs. Consult with your local reliable garage door retailer to show you the difference between them.

Extension and torsion springs:

Torsion springs are the modern type of system which is installed either one or two springs. They are wounded on a core rod at the header of the garage door. What do you need to consider? A high amount of pressure occurs when the garage door reveals sown. Due to such huge pressure, these springs will break over time. In case of malfunctioning, you should follow a couple of things while operating your garage door manually.

  • Don’t try to stop it from coming down
  • Let it go and quickly leave the place
  • Make sure that no one around the garage door

If your garage door has dual springs and one of them is broken. You should replace both of them at the same time. It may increase your bill but having an old spring with the new one will only increase the risks of further damages. Extension springs are an older type of system but safer than torsion springs. They are created as a most useful feature in a garage door. They are installed to support the garage door in the opening and closing process by counterbalancing the weight of the garage door. Anyone who has a little bit of knowledge about garage doors will notice how risky the spring system is. A professional solution to such risk comes in the form of safety cable installation.

Safety cables:

These safety cables are made from light material similar to other door cables. In case garage door springs break; the metal chunks will still go ballistic but only in a certain range of safety cables. You can install them by evaluating the material of your garage door.

Neglected Garage Door Springs Are Dangerous

Depending on the material and style of the garage door, it can weigh up to 500 pounds. Do you know what makes it easy to operate by hand or using a handy remote are the garage door springs?

The more you learn about the specification and features of garage door springs and the pressure that they are constantly under in order to work smoothly, the more you will realize how important is to have well-maintained garage door springs. These springs should be maintained on regular basis. If you are looking for more information and techniques to take care of garage door springs then click here https://www.indianapolisgaragedoorpros.com/broken-garage-door-springs/

How many times during a day do you open your garage door? You probably could go a lifetime and don’t realize that a non-maintained garage door can be dangerous for you. When you open your garage door, the torsion springs while holding its weight releases its pressure at its most relaxed position. When the garage door closes at its most tensed position, the potential energy which the springs hold can cause potential accidents. A suddenly released energy can give you serious injuries when springs break down or being worked on closing the garage door.

If it has been more than five years since you have had torsion springs adjusted or replaced then it is the right time to perform this job right away. Malfunction or old springs can break at any time and release flying pieces of broken metal speedily then they can kill anyone inside the closed garage door at any time. Adjusting the torsion springs simply means making them either tighter or loose. Broken garage door torsion springs should be replaced immediately.

A properly maintained garage door with correctly installed springs will stay few feet off of closing and will not either raise or fall the garage door. Even though it is a simple concept but it is not always easier and easy to conduct garage door replacement tasks on your own. Stay away from it as it can be a dangerous process. If the adjustment of springs is not correct, the garage door can slam down, and too tightly adjusted springs will suddenly fly open the garage door. They can be fatal in both cases.

Of all the DIY projects that you like to conduct around your home unless you have done it a few times before it is always suggested that get professional garage door services especially when it comes to adjusting and replacing the garage door springs. This is because that a little mistake here can be fatal and can cause serious accidents. Professional garage door companies guarantee their services along with the warranties on the products.

Garage Door Repair – Helpful Tips

A well-functional garage door is one of those structures of your house which is used almost frequently. You feel assured that your vehicle and other belongings are safe once you put them in your garage. However, it is quite obvious to feel unsecured and irritated if the huge structure does not work smoothly. In order to prevent these problems, it is strongly suggested to do a regular garage door maintenance which in turn would improve the lifespan of the machine. If you don’t know what is going wrong with the garage door, hire professional garage door services like, Newtown garage door repair to restore the performance of your garage door. 

Most of the experts from reputed and certified companies will provide you an experienced technician who has the right knowledge and expertise to take care of any type of mechanical issue with your garage door. However, it is not difficult to inspect each component of the heavy structure on your own and if you found that nothing serious happened to it then you can maintain and upkeep the garage door using simple DIY techniques. Following mentioned are the simple tips and tricks to keep your garage door in good working positions.

Garage door fails to open or close smoothly: It is one of the common problems with the garage doors. Most of the time, the problem happens due to the accumulated dust and grease on the tracks and panels. In this case, the best thing is to clean the tracks using a mild washing detergent. You may also use a regular household cleaner to wash the tracks along with the rollers. Don’t forget to wipe it out to keep it dry. It is extremely important to lubricate all the moving parts once they have been cleaned properly. Using a good and light lubricant or even powdered graphite would be a good idea for this purpose.

Check the defective tracks of garage door:  In some extreme cases, even after proper garage door maintenance and lubrication, you may experience that your complex structure does not function properly. In this situation, there is the possibility that the tracks of your garage door may be got bent or defective at some panels or sections. You can fix it by hitting the particular area of the track, where it looks to be damaged. You can use a rubber mallet for this purpose. If it does not work then the only option is to hire an experienced garage door technician to replace the entire section or track of the garage door. This is something critical which should be practiced by the number of professional and trained garage door technician.